Map Pin LocationR.P. Lumber - Edwardsville, IL
Water Pump Kit
G. T. Water Products
  • Water Pump Kit
  • Water Pump Kit
  • Water Pump Kit
  • Water Pump Kit

$27.49 Each

Loading Inventory Count

Loading Purchase Count

Details

Includes water powered pump and 8' of 1-1/4" discharge hose. Pumps over 800 gallon per hour without using any electricity. No moving parts, no motor to burn out, made of high-impact ABS plastic. Can lift vertically over 8' and draw down to 1/4" from a flat surface. Safe and easy to use. Simply attach to a garden hose and for every gallon of water used, pumps-a-lot will remove 6 gallon. 2 year warranty. WP25 Instructions: 1: Thread garden hose to pump 2: Attach 1-1/4" discharge hose 3: Submerge pump in water 4: Turn water on, that's it.

Specs
Id 84384
SKU 415480
PartNo WP25
UPC 00077115251009
Country of OriginMade in USA USA
Flow Rate 13 GPM
Discharge Size 1-1/2 In.
CID 1
Compliance & Restrictions

This product can expose you to chemicals including Isoprene which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.

Similar Items
Gt Water Products
Gt Water Products WP-25 Water Powered Pump, 4-1/4 in Outlet, 13 gpm, Plastic
$40.25 Each
Flow Rate : 13 Gpm
Outlet Connection Size : 4-1/4 In
Material : Plastic
Sfa
Saniflo SANIFLO 021 Water Pump, 4.5 A, 120 V, 0.4 hp, 29 gpm
$544.05 Each
Voltage Rating : 120 V
Current Rating : 4.5 A
Frequency Rating : 60 Hz
HP Rating : 0.4 Hp
Inlet Connection Size : 1-1/2 In
Fuel Tank Capacity : 3.7 Gal
Flow Rate : 29 Gpm
Cord Length : 42-1/2 In
Overall Length : 10-1/4 In
Overall Width : 9 In
Overall Height : 8-3/4 In
Temperature Rating : 140 Deg F
Sfa
Saniflo SANIFLO 008 Drain Pump, 4.5 A, 120 V, 0.4 hp, 29 gpm, Thermoplastic
$783.35 Each
Voltage Rating : 120 V
Current Rating : 4.5 A
Frequency Rating : 60 Hz
HP Rating : 0.4 Hp
Inlet Connection Size : 1-1/2 In
Fuel Tank Capacity : 3.7 Gal
Flow Rate : 29 Gpm
Cord Length : 42-1/2 In
Overall Length : 7-1/2 In
Overall Width : 14-1/2 In
Overall Height : 10 In
Material : Thermoplastic
Temperature Rating : 140 Deg F
Tuthill
Fill-Rite SD1202G/SD1202 Fuel Transfer Pump, Motor: 1/4 hp, 12 VDC, 20 A, 30 min Duty Cycle, 3/4 in Outlet, 13 gpm
$474.39 Each
Flow Rate : 13 Gpm
Inlet Connection Size : 1 In
Outlet Connection Size : 3/4 In
Designated Fluid : Biodiesel, Diesel, E15, Gasoline, Kerosene, Mineral Spirits
Nozzle Type : Manual
Motor Specifications : 1/4 Hp, 12 VDC, 20 A, 30 Min Duty Cycle
Suction Tube Length : 15-1/4 To 43-1/4 In
Material : Cast Iron
Includes : (2) 15-1/4 To 29-1/4 In Polypropylene Suction Pipe And Elbow, 15 Ft 12 Ga 2-Wire Battery Cable, 3/4 In Manual Nozzle, 3/4 In X 10 In Hose, 5 Ft Ground Wire, Pump
Sfa
Saniflo SANIFLO 002 Macerator Pump, 4.5 A, 120 V, 0.5 hp, 27 gpm, Thermoplastic
$1,675.85 Each
Voltage Rating : 120 V
Current Rating : 4.5 A
Frequency Rating : 60 Hz
HP Rating : 0.5 Hp
Inlet Connection Size : 1-1/2 In
Fuel Tank Capacity : 3 Gal
Flow Rate : 27 Gpm
Cord Length : 47-1/2 In
Overall Length : 7 In
Overall Width : 20 In
Overall Height : 10-5/8 In
Material : Thermoplastic
Temperature Rating : 104 Deg F
Superior Pump
Superior Pump 90040 Transfer Pump, 2.3 A, 115 V, 0.1 hp, 3/4 in Outlet, 330 gal/hr, Iron
$130.69 Each
Inlet Connection Size : 3/4 In
Outlet Connection Size : 3/4 In
Flow Rate : 330 Gal/hr
Voltage Rating : 115 V
Current Rating : 2.3 A
Frequency Rating : 60 Hz
HP Rating : 0.1 Hp
Temperature Rating : 120 Deg F
Material : Iron
Includes : 6 Ft Suction Hose, Extra Impeller, Gasket And Suction Attachment