Custom TLSGSPT-6 Tile and Grout Sealer, Liquid, Clear, 1 pt, Spray Bottle Clear
Custom Building Products
  • Custom TLSGSPT-6 Tile and Grout Sealer, Liquid, Clear, 1 pt, Spray Bottle Clear

    $53.45 Each

    Loading Purchase Count

    Details

    Provides unsurpassed invisible protection for marble, stone, porcelain, quarry and saltillo tile, grout, concrete and masonry. This long-lasting, water-based sealer actually repels dirt, oil and stains allowing for easy clean-up. Use when maximum protection is required such as in food preparation areas, floors and other high-traffic areas. Can also be used in place of a grout release prior to grouting to prevent grout staining and facilitate grout clean-up. Low odor, pH neutral and nonabrasive. Allows moisture vapor transmission. For interior and exterior use.

    Specs
    Id 154417
    SKU 7307739
    PartNo TLSGSPT-6
    UPC 010186763637
    Net Content 1 Pt
    Container Type Spray Bottle
    Form Liquid
    Color Clear
    Compositions Diethylene Glycol Monobutyl Ether, Fluorophosphate Ester
    Specific Gravity 0.99 To 1.02 G/mL
    Flash Point >200 Deg F
    VOC Content 37 G/L
    PH Range 7.4 To 8.4
    Resists Stain
    Application Method Brush, Lambswool Applicator, Mop, Sponge
    Applicable Materials Clay Paver, Grout, Masonry, Porcelain, Stone Surfaces, Unglazed Tile
    Drying Time 2 To 3 Hr
    Boiling Point >212 Deg F
    Base Type Water
    CID 9
    Documents
    SDS
    Specification Sheet
    You Might Also Like
    CustomCustom TLSGS24Z Tile and Grout Spray Sealer, Water, Clear, Liquid, 24 oz Spray Bottle Clear

    Custom TLSGS24Z Tile and Grout Spray Sealer, Water, Clear, Liquid, 24 oz Spray Bottle Clear

    $39.99Each
    Checking...
    Color: Clear
    Type
    Penetrating
    Net Content
    24 Oz
    Container Type
    Spray Bottle
    Form
    Liquid
    Color
    Clear
    Compositions
    Diethylene Glycol Monobuty Ether, Fluorophosphates Ester
    Specific Gravity
    1 To 1.1 G/cc
    Flash Point
    >200 Deg F
    VOC Content
    37 G/L
    PH Range
    7.4 To 8.4
    Viscosity
    0.99 To 1.02 G/ml
    Coverage Area
    150 To 225 Sq-ft
    Resists
    Stain
    Application Method
    Brush, Lambswool Applicator, Mop, Sponge, Spray
    Applicable Materials
    Clay Paver, Grout, Masonry, Porcelain, Unglazed Tile
    Drying Time
    2 To 3 Hr
    Boiling Point
    >212 Deg F
    Base Type
    Water