Penofin Blue Label Series F1EWR5G Penetrating Stain, Western Red Cedar, Liquid, 5 gal Western Red Cedar
Performance Coatings
  • Penofin Blue Label Series F1EWR5G Penetrating Stain, Western Red Cedar, Liquid, 5 gal Western Red Cedar

    $248.95 Pail

    Loading Purchase Count

    Details

    Penofin exterior finishes were formulated to safeguard the natural beauty of wood and to prevent discoloration from the sun's UV rays. Penofin wood stain resists and retards bleeding caused by nails. Two key ingredients contribute to Penofin's exceptional abilities: Brazilian Rosewood Oil provides tough, deep-down moisture protection while still allowing the wood to "breathe." There's no surface film to trap moisture, chip or peel. Microscopically fine, transoxide pigments inhibit UV damage and darkening. They add deep, rich color without hiding the natural beauty of the grain. Semitransparent mist tones; Nantucket Mist mimics the look of weathered barn wood, Pacific Pearl Mist adds a whisp of white and Mendocino Mist adds a hint of slate gray. Clear tone is a minimally pigmented deep penetrating oil providing limited UV protection. The clear tone protects and conditions the wood to prevent cracking and drying while allowing the wood to gray naturally over time.

    Specs
    Id 288701
    SKU 1897982
    PartNo F1EWR5G
    Net Content 5 Gal
    Form Liquid
    Color Western Red Cedar
    Compositions Solvent Naphtha (Petroleum), Medium Aliph, Xylene, Mixture Of Isomers, Ethylbenzene, 2-Butanone Oxime, 3-Iodo-2-Propynylbutylcarbamate
    Pigment Type Fine Transoxide
    Coverage Area 175 To 300 Sq-ft/gal
    VOC Content 100 G/L
    Application Method Brush, Stain Pad, Sprayer
    Flash Point 122 Deg F
    Boiling Point 277 Deg F
    Temperature Rating 45 To 80 Deg F
    Applicable Materials Hardwood, Softwood
    Curing Time 4 To 7 Days
    Drying Time 3 To 5 Hr
    Base Type Oil
    CID 9
    Documents
    You Might Also Like
    PenofinPenofin F3ECMGA Wood Stain, Cedar, Liquid, 1 gal Cedar (Pack of 4)

    Penofin F3ECMGA Wood Stain, Cedar, Liquid, 1 gal Cedar (Pack of 4)

    $248.764/Pack
    Checking...
    Color: Cedar
    Net Content
    1 Gal
    Form
    Liquid
    Color
    Cedar
    Compositions
    Solvent Naphtha (Petroleum), Medium Aliph, Xylene, Mixture Of Isomers, Ethylbenzene, 2-butanone Oxime, 3-Iodo-2-propynylbutylcarbamate
    Pigment Type
    Trans-Oxide
    Coverage Area
    175 To 300 Sq-ft
    VOC Content
    250 G/L
    Application Method
    Brush, Pad, Pump Sprayer
    Flash Point
    122 Deg F
    Boiling Point
    277 Deg F
    Temperature Rating
    45 To 80 Deg F
    Applicable Materials
    Wood
    Curing Time
    4 To 7 Days
    Drying Time
    4 Hr
    Base Type
    Oil
    PenofinPenofin Blue Label Series F1ECHGA Premium Stain, Semi-Transparent, Chestnut, Liquid, 1 gal Can Chestnut (Pack of 4)

    Penofin Blue Label Series F1ECHGA Premium Stain, Semi-Transparent, Chestnut, Liquid, 1 gal Can Chestnut (Pack of 4)

    $312.604/Pack
    Checking...
    Color: Chestnut
    Net Content
    1 Gal
    Container Type
    Can
    Form
    Liquid
    Color
    Chestnut
    Sheen
    Semi-Transparent
    Compositions
    Solvent Naphtha (Petroleum), Medium Aliphatic, Xylene, Mixture Of Isomers, Ethylbenzene, 2-Butanone Oxime, 3-Iodo-2-Propynylbutylcarbamate
    Coverage Area
    175 To 300 Sq-ft/gal
    VOC Content
    100 G/L
    Application Method
    Brush, Pad, Spray
    Flash Point
    122 Deg F
    Boiling Point
    277 Deg F
    Flammability Rating
    2
    Temperature Rating
    45 To 80 Deg F
    Applicable Materials
    Hardwood
    Curing Time
    4 To 7 Days
    Drying Time
    3 To 4 Hr
    Base Type
    Oil
    PenofinPenofin Blue Label Series F1ESAGA Penetrating Stain, Sable, Liquid, 1 gal Sable (Pack of 4)

    Penofin Blue Label Series F1ESAGA Penetrating Stain, Sable, Liquid, 1 gal Sable (Pack of 4)

    $312.604/Pack
    Checking...
    Color: Sable
    Net Content
    1 Gal
    Form
    Liquid
    Color
    Sable
    Compositions
    Solvent Naphtha (Petroleum), Medium Aliph, Xylene, Mixture Of Isomers, Ethylbenzene, 2-Butanone Oxime, 3-Iodo-2-Propynylbutylcarbamate
    Pigment Type
    Fine Transoxide
    Coverage Area
    175 To 300 Sq-ft/gal
    VOC Content
    100 G/L
    Application Method
    Brush, Stain Pad, Sprayer
    Flash Point
    122 Deg F
    Boiling Point
    277 Deg F
    Temperature Rating
    45 To 80 Deg F
    Applicable Materials
    Hardwood, Softwood
    Curing Time
    4 To 7 Days
    Drying Time
    3 To 5 Hr
    Base Type
    Oil