Paint

Net Content : 26 Oz
Color : Fluorescent Red/Orange
Odor/Scent : Mild
Sheen : Flat/Semi-Gloss
Container Type : Can
Compositions : Propane, N-Butane, Hydrotreated Light Distillate, Naphtha, Petroleum, Hydrotreated Light, Xylenes (O-, M-, P- Isomers), Barium Sulfate, N-Butyl Acetate, Ethylbenzene, Stoddard Solvent, Octane, Pigment Orange And Crystalline Silica/Quartz
Vehicle Type : Modified Alkyd
Coverage Area : 1320 Linear Ft
Flash Point : -156 Deg F
Boiling Point : -37 To 537 Deg C
Flammability Rating : 4
Temperature Rating : 40 To 90 Deg F
Specific Gravity : 0.881
Applicable Materials : Concrete
Curing Time : 8 Hr
Drying Time : 15 Min

Rust-Oleum spray finishes provide long lasting protection to properly prepared wood, metal, or masonry surfaces. Dries to a tough, bright finish that retains its finish for years. Resists peeling, chipping, and weathering. Lead free, safe for children's toys and furniture. Can lid shows color. 12 oz. Covers approximately 25 sq. ft. 5 year shelf life.

Type : Professional
Container Type : Can
Net Content : 15 Oz
Color : Hunter Green
Odor/Scent : Solvent
Sheen : Gloss
Compositions : Acetone, N-Butyl Acetate, Propane, N-Butane, Barium Sulfate, Xylenes (O-, M-, P- Isomers), Ethylbenzene, Nanoscale Titanium Dioxide, Solvent Naphtha, Light Aromatic
Vehicle Type : Modified Alkyd
Coverage Area : 14 Sq-ft
VOC Content : 533 G/L
Flash Point : -96 Deg C
Boiling Point : -37 To 172 Deg C
Flammability Rating : 4
Temperature Rating : 50 To 90 Deg F
Density : 0.798
Specific Gravity : 0.798
Applicable Materials : Ferrous Metal, Non-Ferrous Metal, Wood
Drying Time : 15 Min
Interior/Exterior : Exterior, Interior
Resists : Abrasion, Chipping, Dulling, Fading, Rust

Net Content : 12 Oz
Color : International Harvester White
Sheen : High-Gloss
Compositions : Acetone, Propane, Lt. Aliphatic Hydrocarbon Solvent, Butane, Toluene, Titanium Dioxide, Ethyl 3-Ethoxypropionate, Xylene, Mixed Isomers, Light Aliphatic Hydrocarbon
Viscosity : <20.5 CSt
Flash Point : -20.2 Deg F
Flammability Rating : 4
Temperature Rating : 50 To 90 Deg F
Applicable Materials : Metal, Wood
Drying Time : 15 Min
PH Range : 7
Resists : Corrosion

Container Type : Can
Net Content : 10 Oz
Color : Black
Sheen : Flat
Compositions : Acetone, Propane, N-Butane, Hydrotreated Light Distillate, Hydrous Magnesium Silicate, N-Butyl Acetate, Xylenes (O-, M-, P- Isomers), Naphtha, Petroleum, Hydrotreated Light, Ethylbenzene, Solvent Naphtha, Light Aromatic, Aliphatic Hydrocarbon, Carbon Black
VOC Content : 545 G/L
Flash Point : -96 Deg C
Boiling Point : -37 To 537 Deg C
Flammability Rating : 4
Temperature Rating : 120 Deg F
Specific Gravity : 0.717
Applicable Materials : Bare Metal, Wood
Drying Time : 20 Min
Base Type : Oil
Interior/Exterior : Exterior, Interior

Container Type : Can
Net Content : 12 Oz
Color : Golden Leaf
Sheen : Matte
Compositions : Acetone, Propane, Naphtha, Petroleum, Hydrotreated Light, N-Butane, Hydrous Magnesium Silicate, Xylenes (O-, M-, P- Isomers), Hydrotreated Light Distillate, Dimethyl Carbonate, Titanium Dioxide, Propylene Glycol Monobutyl Ether, Ethylbenzene, Ethylene Glycol Monobutyl Ether
Vehicle Type : Modified Alkyd
Coverage Area : 60 To 10 Sq-ft
VOC Content : 548 G/L
Flash Point : -96 Deg C
Boiling Point : -37 To 537 Deg C
Flammability Rating : 4
Temperature Rating : 50 To 90 Deg F
Thinners : Mineral Spirits, Xylene
Applicable Materials : Metal, Plastic, Wood
Drying Time : 20 Min
Base Type : Oil
Interior/Exterior : Exterior, Interior
Resists : Fade, Moisture, UV

Container Type : Can
Net Content : 12 Oz
Color : Almond
Sheen : Satin
Compositions : Acetone, Propane, Butane, Isobutyl Acetate, Titanium Dioxide, Lt. Aliphatic Hydrocarbon Solvent, Toluene, Calcium Carbonate, Xylene Mixed Isomers, Methyl Ethyl Ketoxime
Viscosity : <20.5 CSt
Coverage Area : 25 Sq-ft
Flash Point : -20.2 Deg F
Flammability Rating : 4
Temperature Rating : 55 To 75 Deg F
Density : 1.55
Thinners : Mineral Spirits
Applicable Materials : Ceramic, Fabric, Glass, Metal, Paper, Paper Mache, Plastic, Wood
Curing Time : 1 Hr
Drying Time : 10 Min
Base Type : Acrylic
Interior/Exterior : Exterior, Interior
Resists : Fade, UV

Net Content : 32 Oz
Color : International Harvester Red
Compositions : Light Aliphatic Hydrocarbon, C.I. Pigment Red 52
Viscosity : <20.5 CSt
Application Method : Brush, Spray Gun
Flash Point : 102.2 Deg F
Boiling Point : 280.4 Deg F
Flammability Rating : 2
Temperature Rating : 40 To 120 Deg F
Density : 1.07
Applicable Materials : Metal, Wood
Curing Time : 56 Hr
Drying Time : 1 To 3 Hr
Interior/Exterior : Exterior
Resists : Corrosion

Container Type : Aerosol Can
Net Content : 12 Oz
Color : Ocean Mist
Odor/Scent : Solvent-Like
Sheen : Gloss
Compositions : Acetone, Propane, Titanium Dioxide, N-Butane, N-Butyl Acetate, Naphtha, Petroleum, Hydrotreated Light, Dimethyl Carbonate, 1-Methoxy-2-Propyl Acetate, Solvent Naphtha, Light Aromatic, Xylenes (o-, M-, P- Isomers), Propylene Glycol Monobutyl Ether, 1,2,4-Trimethylbenzene, Ethylbenzene, Zirconium 2-Ethylhexanoate, Zirconium Acetate
Vehicle Type : Acrylic Modified Alkyd
Coverage Area : 8 To 12 Sq-ft
VOC Content : 572 G/L
Flash Point : -96 Deg C
Boiling Point : -37 To 537 Deg C
Flammability Rating : 4
Temperature Rating : 50 To 90 Deg F
Specific Gravity : 0.83
Thinners : Mineral Spirits, Xylene
Applicable Materials : Metal, Plastic, Wood
Drying Time : 20 Min
Base Type : Oil
Interior/Exterior : Exterior, Interior
Resists : Fade, Moisture, UV

Container Type : Can
Net Content : 12 Oz
Color : Ivory
Sheen : Gloss
Compositions : Acetone, Propane, N-Butyl Acetate, Butane, Lt. Aliphatic Hydrocarbon Solvent, Titanium Dioxide, Ethyl 3-Ethoxypropionate, Barium Sulfate, Xylene Mixed Isomers, Ethylbenzene, Unsaturated Fatty Acids
Viscosity : <20.5 CSt
Coverage Area : 25 Sq-ft
Flash Point : -29 Deg C
Flammability Rating : 4
Temperature Rating : 40 To 80 Deg F
Density : 0.77
Thinners : Lacquer
Applicable Materials : Ceramic, Concrete, Glass, Masonry, Metal, Plaster, Wicker, Wood
Curing Time : 30 Min
Drying Time : 8 Min
PH Range : 7
Interior/Exterior : Exterior
Resists : Metal Corrosion

Net Content : 11 Oz
Color : Chalkboard Black
Odor/Scent : Solvent
Compositions : Acetone, Propane, Naphtha, Petroleum, Hydrotreated Light, N-Butane, Hydrotreated Light Distillate, Xylenes (o, M, P-isomers), Carbon Black, Barium Sulfate, Ethylbenzene, Octane
Flash Point : -96 Deg C
Boiling Point : -37 To 3000 Deg C
Temperature Rating : <50 Deg C
Specific Gravity : 0.762

Container Type : Can
Net Content : 340 G
Color : Kona Brown
Sheen : Gloss
Compositions : Acetone, Propane, N-Butane, Naphtha, Petroleum, Hydrotreated Light, Iron Oxide, Xylene (Mixed Isomers), Solvent Naphtha, Light Aromatic, 1,2,4-Trimethylbenzene, Ethylbenzene, Ethylene Glycol Monobutyl Ether, Carbon Black, Stoddard Solvent, Amorphous Silica
Coverage Area : 15 Sq-ft
VOC Content : 508 G/L
Flash Point : -96 Deg C
Boiling Point : -24 To 168 Deg C
Flammability Rating : 4
Specific Gravity : 0.747
Applicable Materials : Metal, Wood
Drying Time : 30 To 60 Min

Net Content : 17 Oz
Color : APWA Orange
Odor/Scent : Solvent
Container Type : Can
Compositions : Propane, Acetone, Naphtha, Petroleum, Hydrotreated Light, N-Butane, Xylenes (O-, M-, P- Isomers), Titanium Dioxide, Hydrous Magnesium Silicate, Ethylbenzene
Coverage Area : 500 To 530 Linear Ft
Flash Point : -104 Deg C
Boiling Point : -44 To 537 Deg C
Flammability Rating : 4
Temperature Rating : >32 Deg F
Density : 0.828
Applicable Materials : Concrete, Grass, Gravel, Pavement
Drying Time : 10 Min
Base Type : Water
Resists : Scuff

Container Type : Can
Net Content : 12 Oz
Color : Smoke Gray
Sheen : Gloss
Compositions : Acetone, Propane, N-Butyl Acetate, Butane, Lt. Aliphatic Hydrocarbon Solvent, Titanium Dioxide, Ethyl 3-Ethoxypropionate, Barium Sulfate, Xylene Mixed Isomers, Ethylbenzene, Carbon Black, Unsaturated Fatty Acids
Viscosity : <20.5 CSt
Coverage Area : 25 Sq-ft
Flash Point : -29 Deg C
Flammability Rating : 4
Temperature Rating : 40 To 80 Deg F
Density : 0.75
Thinners : Lacquer
Applicable Materials : Ceramic, Concrete, Glass, Masonry, Metal, Plaster, Wicker, Wood
Curing Time : 30 Min
Drying Time : 8 Min
PH Range : 7
Interior/Exterior : Exterior
Resists : Metal Corrosion

Net Content : 12 Oz
Color : Clear
Odor/Scent : Solvent-Like
Sheen : Flat/Matte
Container Type : Aerosol Can
Compositions : Acetone, N-Butyl Acetate, Propane, N-Butane, Ethyl 3-Ethoxypropionate, 1-Methoxy-2-Propyl Acetate, Xylenes (o-, M-, P- Isomers), Propylene Glycol Monobutyl Ether, Dimethyl Carbonate, Ethylbenzene, Butyl Methacrylate, Toluene
Coverage Area : 10 To 12 Sq-ft
Application Method : Spray
Flash Point : -96 Deg C
Boiling Point : -37 To 537 Deg C
Flammability Rating : 4
Temperature Rating : 50 To 90 Deg F
Specific Gravity : 0.765
Applicable Materials : Wood, Metal, Wicker, Plastic, Glass, Plaster, Paper
Drying Time : 20 Min
Interior/Exterior : Exterior, Interior

Odor/Scent : Mild
Sheen : Semi-Gloss
Compositions : Titanium Dioxide, 2,2,4-Trimethyl-1,3-Pentanediol Isobutyrate, Dipropylene Glycol Monomethyl Ether Base, Dipropylene Glycol Monobutyl Ether, Dipropylene Glycol Monomethyl Ether Top Coat, Fatty Alcohol Ethoxylate, Sodium Metasilicate Cleaner
Pigment Type : Aluminum Oxide, Silica
Vehicle Type : Styrene Acrylic, Urethane Acrylic
Coverage Area : 75 To 100 Sq-ft
VOC Content : <50 G/L
Application Method : Brush, Roller
Flash Point : 94 Deg C
Boiling Point : 100 To 537 Deg C
Application Temperature : 50 To 90 Deg F
Specific Gravity : 1.278 Base, 1.043 Top Coat, 1.021 Cleaner
Applicable Materials : Ceramic, Concrete, Laminate, Porcelain, Vinyl, Wood
Curing Time : 7 Days
Drying Time : 1 Hr
PH Range : 8.6 Base, 7 Top Coat
Base Type : Water
Includes : (6) 1 Qt Tint Base Coats, (1) 1 Qt Top Coat And 4 Oz Cleaner

Container Type : Aerosol Can
Net Content : 12 Oz
Color : Navy
Odor/Scent : Mild
Compositions : Dimethyl Ether, Ethanol, Titanium Dioxide, N-Methyl 2-Pyrrolidone, 2,4,7,9-Tetramethyl-5-Decyne-4,7-Diol, Carbon Black, Morpholine, Dipropylene Glycol Monomethyl Ether, N-(3,4-Dichlorophenyl)-n,n-Dimethylurea, 3-Iodo-2-Propynyl Butyl Carbamate
Coverage Area : 5.5 Sq-ft
Application Method : Spray
Flash Point : -41 Deg C
Boiling Point : -24 To 537 Deg C
Flammability Rating : 4
Temperature Rating : 50 To 90 Deg F
Specific Gravity : 0.87
Applicable Materials : Fabric
Curing Time : 24 Hr
Drying Time : 1 Hr
Interior/Exterior : Exterior
Resists : UV, Weather

Container Type : Can
Net Content : 340 G
Color : Clear
Sheen : Gloss
Compositions : Acetone, N-Butyl Acetate, Propane, N-Butane, 1-Methoxy-2-Propyl Acetate, Xylenes (O-, M-, P- Isomers), Ethylbenzene
Coverage Area : 15 Sq-ft
VOC Content : 606 G/L
Flash Point : -96 Deg C
Boiling Point : -37 To 375 Deg C
Flammability Rating : 4
Specific Gravity : 0.747
Applicable Materials : Metal, Wood
Drying Time : 30 To 60 Min

Container Type : Can
Net Content : 12 Oz
Color : Black
Odor/Scent : Solvent
Sheen : Semi-Gloss
Compositions : Acetone, Propane, N-Butyl Acetate, N-Butane, Naphtha, Petroleum, Hydrotreated Light, Dimethyl Carbonate, Xylenes (O-, M-, P- Isomers), Talc (Hydrous Magnesium Silicate), Barium Sulfate, Carbon Black, Ethylbenzene
Vehicle Type : Oil-Modified Alkyd
Coverage Area : 6 To 10 Sq-ft
VOC Content : 580 G/L
Flash Point : -96 Deg C
Boiling Point : -37 To 3000 Deg C
Flammability Rating : 4
Temperature Rating : 50 To 90 Deg F
Specific Gravity : 0.774
Applicable Materials : Ferrous Metal, Non-Ferrous Metal, Wood
Curing Time : 24 Hr
Drying Time : 5 To 29 Hr
Interior/Exterior : Exterior, Interior
Resists : Abrasion, Chipping, Dulling, Fading, Rust

Net Content : 10.25 Oz
Color : Copper
Odor/Scent : Solvent
Sheen : Glitter
Container Type : Can
Compositions : Heptane, Branched, Cyclic And Linear, Propane, N-Butane, Naphtha, Petroleum, Hydrotreated Light, Cyclohexane, Naphtha, Hydrotreated Heavy, Benzyl Alcohol, Octane, Hexane, Polyglycol, Siloxane
Coverage Area : 3 To 5 Sq-ft/can
Flash Point : -96 Deg C
Boiling Point : -37 To 2230 Deg C
Flammability Rating : 4
Temperature Rating : <50 Deg C
Specific Gravity : 0.678
Applicable Materials : Ceramic, Metal, Paper, Plastic, Pottery, Styrofoam, Wicker, Wood
Curing Time : 24 Hr
Drying Time : 20 Min

Container Type : Can
Net Content : 12 Oz
Color : Equestrian
Sheen : Gloss
Compositions : Acetone, Butane, Ethyl 3-Ethoxypropionate, Ethylbenzene, Hydrotreated Heavy Petroleum Naphtha, Iron Oxide, Isobutyl Acetate, Light Aliphatic Hydrocarbon, Lt. Aliphatic Hydrocarbon Solvent, Methyl Ethyl Ketoxime, Propane, Toluene, Xylene Mixed Isomers
Viscosity : <20.5 CSt
Vehicle Type : Acrylic
Coverage Area : 25 Sq-ft
Flash Point : -20.2 Deg F
Flammability Rating : 4
Temperature Rating : 55 To 75 Deg F
Density : 1.55
Specific Gravity : 0.74
Thinners : Mineral Spirits
Applicable Materials : Ceramic, Fabric, Glass, Metal, Paper, Paper Mache, Plastic, Wood
Curing Time : 1 Hr
Drying Time : 10 Min
Base Type : Solvent
Interior/Exterior : Exterior, Interior
Resists : Fade, UV

Type : Multi-Purpose
Container Type : Can
Net Content : 340 G
Color : Heirloom White
Sheen : Satin
Compositions : Acetone, Propane, Naphtha, Petroleum, Hydrotreated Light, Titanium Dioxide, N-Butane, Xylenes (O-, M-, P- Isomers), Hydrotreated Light Distillate, Hydrous Magnesium Silicate, N-Butyl Acetate, Ethylbenzene, Ethylene Glycol Monobutyl Ether
VOC Content : 540 G/L
Flash Point : -96 Deg C
Boiling Point : -37 To 537 Deg C
Flammability Rating : 4
Temperature Rating : 120 Deg F
Specific Gravity : 0.797
Applicable Materials : Masonry, Metal, Plaster, Unglazed Ceramic, Wood
Interior/Exterior : Exterior, Interior
Resists : Chipping, Fading

Net Content : 405 G
Color : Black
Compositions : Toluene, Dimethyl Ether, N-Heptane, Acetone, Propane, N-Butane, Carbon Black, Aliphatic Petroleum Distillates
Flash Point : -96 Deg C
Boiling Point : -37 To 537 Deg C
VOC Content : 680 G/L
Coverage Area : 3.2 To 6.6 Sq-ft
Base Type : Oil
Resin Type : Rubber
Curing Time : 15 Min
Drying Time : 8 Hr
Application Temperature : 50 Deg F
Flammability Rating : 4
Applicable Materials : Aluminum, Asphalt, Concrete, Masonry, Metal, PVC

Container Type : Can
Net Content : 340 G
Color : White
Sheen : Flat
Compositions : Acetone, Propane, N-Butane, N-Butyl Acetate, Xylenes (O-, M-, P- Isomers), Toluene, Hydrous Magnesium Silicate, Titanium Dioxide, Hydrotreated Light Distillate, Kaolin Clay, Ethylbenzene, Solvent Naphtha, Light Aromatic
VOC Content : 532 G/L
Flash Point : -96 Deg C
Boiling Point : -37 To 537 Deg C
Flammability Rating : 4
Temperature Rating : 120 Deg F
Specific Gravity : 0.861
Applicable Materials : Aluminum, Concrete, Drywall, Masonry, Metal, Wicker
Base Type : Oil
Interior/Exterior : Exterior, Interior
Resists : Corrosion