3M™ marine adhesive sealant 5200 is a one component, high-strength, moisture curing, gap filling polyurethane for permanent bonding of wood, gelcoat and fiberglass. It cures to form a firm, rubbery, water-proof seal on joints and boat hardware, above and below the waterline. This product has been trusted throughout the marine industry forever 50 years. Tough and flexible to form strong bonds. Forming water-tight seals, 3M™ marine adhesive sealant 5200 offers permanent adhesion to wood, gelcoat and fiberglass. In addition, our marine adhesive sealant is flexible and allows for structural movement and dissipation of stress that may be caused by vibration, swelling, shrinking or shock. Available in both cartridge and sausage packs to meet your application requirements.
| Id | 302807 |
| SKU | 7569874 |
| PartNo | 5206 |
| UPC | 051135052068 |
| Net Content | 1 Oz |
| Container Type | Tube |
| Form | Paste, Solid |
| Color | White |
| Compositions | Urethane Prepolymer, Talc, Titanium Dioxide, Fumed Silica, Zinc Oxide, Diethylene Glycol Monoethyl Ether Acetate, Alkyl Isocyanate Silane, (Gamma-Mercaptopropyl)Trimethoxysilane |
| Specific Gravity | 1.36 G/mL |
| VOC Content | 40 G/L |
| Density | 1.36 G/cc |
| Viscosity | 100,000 To 500,000 CPs |
| Curing Time | 5 Days |
| Temperature Rating | -40 To 190 Deg F |
| Flammability Rating | 1 |
| Tensile Strength | 705 Psi |
| Shore Hardness | 68 |
| Resists | Weather |
| Coverage Area | 120 Linear Ft |
| Base Type | Polyurethane |
| Applicable Materials | Fiberglass, Gelcoat, Wood |
| CID | 9 |
